MÁY IN PHỦ UV MGI JETVARNISH 3DS | Phân phối máy in phủ UV MGI trên toàn quốc
MGI JETVARNISH 3DS là thiết bị sau in 100% kỹ thuật số. Dựa trên công nghệ ép nhũ độc đáo iFoil của MGI, được áp dụng trong công đoạn sau in nhằm làm tăng giá trị sản phẩm in ấn. Đây là một giải pháp ép nhũ kim kỹ thuật số lên toner sáng tạo độc đáo, một sự kết hợp thông minh giữa in kỹ thuật số và giải pháp ép nhũ nhiệt.
Máy phủ UV cục bộ MGI JETVARNISH 3DS có các tính năng nổi bật như sau:
- Phủ UV cục bộ với độ chính xác cao
- Có thể thực hiện trên bản in kỹ thuật số và in offset
- Không cần bản kẽm | lưới in | cao su in, ít hao phí, thời gian đáp ứng nhanh
- Phủ UV với các độ dày khác nhau chỉ qua 1 lần phủ
- Phủ UV theo dữ liệu biến đổi
- Thân thiện với môi trường, kích thước nhỏ gọn, tiết kiệm điện năng
Tái tạo tất cả các hiệu ứng trên chỉ bằng một loại mực UV và chỉ qua một lần phủ
Thông số kỹ thuật của máy phủ UV MGI JETVARNISH 3DS:
System Configurations | ||
---|---|---|
Printing Technology | MGI’s exclusive inkjet engine technology Drop-on-Demand (DoD) technology Piezoelectric printheads,developed and manufactured by Konica Minolta Single pass printing Flexible & scalable printing architecture |
|
Coating Thicknesses | Depending on your file, the inks used and the type of surface of your sheet, the coating thickness can vary. On laminated and aqueous coating: 15 μm – 100 μm for 3D raised effects and tactile finish. On toner and coated paper: 30 μm – 100 μm for 3D raised effects and a tactile finish |
|
Production speed | In 2D/flat mode – up to 2,298 A3 sheets per hour (with 15 µm) In 3D/raised mode – up to 1,624 A3 sheets per hour (with 30 µm) |
|
Registration | Fully motorized and automatic left side lay guide. Automated registration featuring MGI ARC system with optical detection of printed crop marks. Overall registration of ± 200 μm |
|
Formats | Min. 21×30 cm / 8 x 11.8” Max. 36.4×102 cm / 14.33×40.15” Max. Printable Width 35.5 cm |
|
Substrate Thickness | Min: 135 Gsm and not less than 150 μm or 6 mil before printing & lamination Max: 450 Gsm and not more than 450 μm or 24 mil before printing & lamination Motorized height-adjustment print heads |
|
Substrates | Printing on most matte or glossy laminated surfaces, with or without aqueous coating, layered paper, plastic, PVC and other coated materials. Spot 3DS coat directly onto most digital prints (ie. bizhub) with no lamination or coating required. |
|
UV Coatings and capacity | 3D varnish delivered with a 10-litre tank capacity | |
High Capacity Automatic Feeder |
Feeder able to handle a paper pile up to 30 cm 3,000 sheets at 135 gsm |
|
High Pile Output Stacker | Stacker able to handle a paper pile up to 30 cm / 11.86” high 3,000 sheets at 135 gsm |
|
Paper Path | 100% flat paper path Vacuum feed system Air feed system Automatic double sheet detection In-line LED dryer “On-the-fly” drying & curing via integrated LED Spot Coated sheets can be immediately finished or handled, no additional drying time required |
|
Front End System | Dedicated PC; CPU + touch-screen + keyboard/mouse Ethernet connection 10/100/1000 BT (RJ 45) Built-in Application Software Suite Comprehensive job queue management Predictive printing cost calculator (coating consumption) Dedicated image editor to do local and fast image editing prior to production |
|
Maintenance & Remote Technical Support |
Daily maintenance completed in less than 10 minutes Majority of procedures are automated Automatic cleaning system From cold start to production in less than 10 minutes Remote troubleshooting & support via included video/ web camera (high speed internet connection required) |
|
Operator Panel | Integrated user-friendly LCD touch-screen | |
Options | Twin option 2nd print engine to increase 3D print speed and coating thickness, up to 200 μm variable data option.Variable Data Option: Complete system including RIP, barcode reader and MGI software to automatize the association between a pre-printed barcode and its specific spot coating file |
|
Dimensions (L x W x H) & Weight |
4.25 (5.50) x 1.06 x 1.80 meter 1 meter / 3.3’ clearance required on all 4 sides ± 1,400 kg / ± 3,100 lbs Weight |
|
Electrical | 7.5 kW (32 A) at 220–240 Volts; 2 plug CEE/IP44 32A (1P+N+E) | |
Requirements | ||
Operating Environment | Temperature: 18 to 30°C / 64 to 86°F Relative humidity: between 30 and 50% (no condensation) |
|
Respecting the Environment |
Eliminates resource waste (wasted electricity, paper and varnish) No plates (offset) or screens (screen printing) No messy cleanup or preparation between jobs Drastic reduction in amount of consumables and use of bulk packaging. Coating without volatile solvent. |
Ưu điểm của máy in phủ UV cục bộ MGI 3Ds:
- Thời gian chuẩn bị ngắn
- Cho phép in đơn hàng số lượng ít
- Tùy biến theo nhu cầu
- Tính linh hoạt cao
- Ép nhũ trực tiếp lên bản in kỹ thuật số và offset
- Công nghệ ép nhũ lên nhũ và phủ UV trong lên nhũ
Ép nhũ biến đổi dữ liệu là một thị trường hoàn toàn mới và đầy tiềm năng phát triển.
*** Máy in phủ UV MGI JETVARNISH 3DS hiện không có sẵn hàng ở Việt Nam, quý khách hàng có nhu cầu đặt hàng, vui lòng liên hệ với chúng tôi theo contact bên dưới:
================================================================================
Chi nhánh Hà Nội – Công ty TNHH Đầu tư LEFAMI
Nhà phân phối máy in công nghiệp Konica Minolta – Máy in phủ UV MGI JETVARNISH 3DS tại Việt Nam
- Địa chỉ: Số 21 Đỗ Quang – Quận Cầu Giấy – Hà Nội
- Liên hệ: Vũ Tiến Đạt – Phụ trách kinh doanh PP
- Điện thoại: 0944.299.288
- Email: mrvu.konica@gmail.com
- Web: http://mayinmau.org